|
1.
MMC Electronics.
With
variable speed pre-selection, smooth start-up, safety brake and
overload protection the MMC electronics minimise
working
stress and adapt machine performance to
the working material.
|
2.
FastFix
saw blade changing system.
Rapid
blade changes with a
convenient saw blade changing system that
saves you time and money.
|
3.
Convenient operation.
The
guard release is integrated in the two-stage switch and can be
operated by both right and left-handers. The same applies
for
the safety switch-on lock.
|
|
4.
Dust extraction.
The
KAPEX is fitted with an
extraction connector and an
efficient
chip deflector funnel: the chips are extracted directly where
they are produced.
|
5.
Settings accurate to the millimetre.
Fine
adjuster operated from the front, for precise cutting angles.
Make complex cuts in no time at all.
|
6.
Precision grooving.
Cut
accurate grooves with the stepless trenching depth adjuster:
simply actuate the lever, set the trenching depth with a single
turn and start
working... Intelligent.
|
|
7.
Secure workpiece support surface.
The
large sliding quick-release fences allow the accurate positioning
of workpieces in their 'original wall position' and the
attachment of self-manufactured positioning supports.
|
8.
Precision dual-line laser.
Irrespective
of whether you
position the workpiece from the left or right,
the laser lines will always show the exact width of the cut and
make your work easier as a result.
|
9.
Robust
and stable.
The
KAPEX was designed for tough industrial applications. The large
magnesium diecast base with rubber feet provides
maximum
stability.
|
|
10.
Easy-to-read scales.
The
easy-to-read scales are
abrasion-resistant, the
pointer can
also be adjusted.
The rotary base has a 60°
range and
is adjusted via the convenient clamp lever.
|
11.
Easy transportation.
Transport
safety device, clamp, cable holder, well designed hand grips and
21.5 kg in weight - the KAPEX is ideal for mobile applications.
|
12.
Bevel included.
Transfer
interior and exterior angles precisely from the workpiece to your
KAPEX using the bevel.
|
|
13.
Intelligent base height.
The
KAPEX saw base is the
same height as the SYSTAINER SYS 1,
which can be used to support long workpieces when working on the
floor.
|
14.
120 mm cutting depth.
The
unique special cutting position on the KAPEX allows you to cut
strip material with a maximum height of 120 mm quickly, safely
and accurately.
|
15.
Space-saving precision design.
The
innovative twin-column guide holds the saw blade in position with
even greater accuracy and excludes com-ponents protruding from
the rear.
|
|
16.
Rapid clamping.
The
tilt angle is easy to adjust from the front. Simply detach the
quick-release clamp, set the angle and lock - it couldn't
be
easier...
|
17.
No dangerous
obstacles.
The
cable holder keeps your workplace tidy and eliminates dangerous
obstacles when you
transport the machine.
|
|
